Milwaukee MI5560
Milwaukee MI5560
This kit contains:
- PH55
- EC60
- sachet calibration fluid pH4.01
- sachet calibration fluid pH7.01
- sachet calibration fluid EC12.88
- KCL storage cover
Why Choose the Milwaukee PH55?
- Accurate Measurements – pH range -2.0 to 16.0 with ±0.1 accuracy.
- Dual Functionality – Measures pH & temperature simultaneously.
- Waterproof & Durable – Designed for harsh environments.
- Replaceable Probe – Extends the tester’s lifespan for long-term use.
- Automatic Temperature Compensation (ATC) – Ensures accurate readings in any condition.
Proper Care & Maintenance:
All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!
- Always store with the cap full of buffer or storage solution MA9015 not water.
- Clean your Tester regularly by soaking in cleaning solution MA9016.
- Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.
- Gently stir the Tester in the sample for a faster result.
Specifications:
- pH Range: -2.0 to 16.0 pH
- Temperature Range: -5.0 to 60.0°C (23 to 140°F)
- pH Resolution: 0.1 pH
- pH Accuracy: ±0.1 pH
- Temperature Accuracy: ±0.5°C (±1°F)
- Typical EMC Deviation: ±0.1
- Typical EMC Temperature Deviation: ±0.3°C (±0.6°F)
- Temperature Compensation: Automatic from -5 to 60°C (23 to 140°F)
- Calibration Automatic: 1 or 2 points with 2 sets of pre-memorized buffers (pH 4.01, 7.01, 10.01) or (pH 4.01, 6.86, 9.18)
- Probe: Replaceable double junction for extended life (Mi56P)
- Environment: -5 to 50°C / 23 to 122°F; max RH 100%
- Battery Type: 4 x 1.5V; IEC LR44, A76 (included)
- Battery Life: Approx. 300 hours of use
- Auto-off: after 8 minutes on non-use
- Dimensions: 254 × 67 × 47 mm
- Weight: 191 g
Why Choose the Milwaukee EC60?
- Measures conductivity and TDS with automatic temperature compensation
- Ideal range for hydroponic and other growers (0.00 to 20.00 mS/cm)
- Units in mS/cm or ppt easily convertable to ppm
- Factory calibrated with the ability to recalibrate if needed
- Replaceable electrode
- Fully waterproof to IP65
- Approximately 100 hours of use (4 x 1.5V batteries included)
Proper Care & Maintenance:
- Maintenance: EC electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap water after every use.
+31(0)6 23361355